|
|
Product Description
Product Detail
Drawings
Catalog PDF
3-D Model
|
Product Description
The Aegis QubeTM Beam Routing System provides a modular and versitile means for routing, shielding, and enclosing laser or similar light beams above an optical table. The system is composed of a hollow cube to hold and enclose optics mounts, a stout post holder and clamping fork combination for mounting the cube to an optical table, and a large selection of tubes in various lengths to route the optical beam into and out of the cube. A wide selection of adaptors are provided to allow many routing configurations. Cover plates are provided to enclose the open sides of the cube.
The Aegis QubeTM Beam Routing System provides a modular and versitile means for routing, shielding, and enclosing laser or similar light beams above an optical table. The system is composed of a hollow cube to hold and enclose optics mounts, a stout post holder and clamping fork combination for mounting the cube to an optical table, and a large selection of tubes in various lengths to route the optical beam into and out of the cube. A wide selection of adaptors are provided to allow many routing configurations. Cover plates are provided to enclose the open sides of the cube.
| |
|
|
Ordering Information | | Quantity | Model | Description | Price | | | Cube and Adaptors | | | Q-OC-1 | Cubic Enclosure | | | | Q-XE-TA-1 | Beam Tube Adaptor Plate | | | | Q-XE-CP-1 | Cube Cover Plate | | | | Q-XE-DI-1 | Probe Beam Access Plate | | | | Q-XE-DI-2 | SMA Beam Access Plate | | | | Q-XE-MA-1 | Rod Clamp/Table Top Adaptor Plate | | | | Q-A50-E | Optic Mount Adaptor, 0.5-inch | | | | Q-CC-1 | Cube Connector Peg | | | | Q-CP-1 | Cube Post Adaptor | | | | Optical Mounts | | | Q-SS100-R3HN | Stainless Steel Kinematic Optics Mount, 1-inch Diameter | | | | Q-IBC-1 | 3-Axis Gimbal Prism/Beamsplitting Cube Mount | | | | Q-XIPR-1 | Polarizer/Wave Plate Rotator, 1-inch Diameter | | | | Q-XILP-1 | XY Lens Positioner, 1-inch Diameter | | | | Table Mounting* | | | Q-TMS-0.75 | Pedestal Holder with Clamping Fork, 0.75 in., For Post Dia. 1 in. | | | | Q-TMS-1 | Pedestal Holder with Clamping Fork, 1 in., For Post Dia. 1 in. | | | | Q-TMS-1.5 | Pedestal Holder with Clamping Fork, 1.5 in., For Post Dia. 1 in. | | | | Q-TMS-2 | Pedestal Holder with Clamping Fork, 2 in., For Post Dia. 1 in. | | | | Q-TMS-3 | Pedestal Holder with Clamping Fork, 3 in., For Post Dia. 1 in. | | | | Q-TMS-4 | Pedestal Holder with Clamping Fork, 4 in., For Post Dia. 1 in. | | | | Beam Tubes | | | Q-BT-1 | Beam Tube, 1-in. | | | | Q-BT-2 | Beam Tube, 2-in. | | | | Q-BT-3 | Beam Tube, 3-in. | | | | Q-BT-4.5 | Beam Tube, 4.5-in. | | | | Q-BT-6 | Beam Tube, 6-in. | | | | Q-BT-12 | Beam Tube, 12-in. | | | | Q-BT-C | Connector, Beam Tube | | | | Guide Rods | | | Q-RG-4 | Guide Rod, 4-inch Spacing | | | | Q-RG-6 | Guide Rod, 6-inch Spacing | | | | Q-RG-8 | Guide Rod, 8-inch Spacing | | | | Q-RG-10 | Guide Rod, 10-inch Spacing | | | | Q-RG-12 | Guide Rod, 12-inch Spacing | |
| | *PS Series Pedestal Posts ordered separately (see Pedestal Post System) | 
Q-OC-1 Cubic Enclosure
| 
Q-SS100-R3HN Optics Mount
| 
The Q-IBC-1 Gimbal Prism/Beamsplitting Cube Mount (The Q-OC-1 cube is mounted over the top of this mount.)
| 
The Q-XIPR-1 Polarizer Rotator
| 
Q-XILP-1 XY Lens Positioner shown with Q-XE-TA-1 Beam Tube Adaptor attached. The Q-XE-TA-1 is sold separately from the Q-XILP-1.
| 
Q-TMS Series pedestal holder and clamping fork (PS-series pedestal post ordered separately)
| 
Clockwise from the top: Q-XE-TA-1 Beam Tube Adaptor, Q-XE-CP-1 Cover Plate, Q-XE-DI-series Beam Access Plates
| 
Q-BT Series beam tubes
| 
(Left to right) Q-CP-1, Q-A50-E, and Q-XE-MA-1
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Back To Top
|
|
|
| |
|
|
|
|
|
|
|
|
|