|
|
| X95 Structural Rails and Carriers |
|
|
CXL95-120, CXL95-80, CXL95-50, and X95-0.5
X95 rails and CXL95 carriers enable complex frame designs
|
-
Ideal for constructing large-scale, linear optical devices- Rigid yet lightweight rail design
- Easy-on/Easy-off dovetail mounting
- Rail lengths of up to 20 ft (6.4 m)
|
|
|
|
Product Description
Product Detail
Specifications
Drawings
Catalog PDF
3-D Model
|
Product Description
The X95 Rail and Carrier System is a rigid and lightweight support for large-scale, linear optical and instrumentation setups.
X95 Rails are cylindrical aluminum extrusions with four longitudinal reinforcing ribs. The 10 mm thick ribs provide four symmetrical dovetail clamping surfaces for carriers and significantly increase the longitudinal and torsional rigidity of the rail. X95 rails are available in standard lengths of up to 2.5 m. On request, lengths of up to 20 ft (6 m) may be special-ordered. Rail end faces are tapped with four M6 holes in a 63 mm square pattern.
The X95 Rail and Carrier System is a rigid and lightweight support for large-scale, linear optical and instrumentation setups.
X95 Rails are cylindrical aluminum extrusions with four longitudinal reinforcing ribs. The 10 mm thick ribs provide four symmetrical dovetail clamping surfaces for carriers and significantly increase the longitudinal and torsional rigidity of the rail. X95 rails are available in standard lengths of up to 2.5 m. On request, lengths of up to 20 ft (6 m) may be special-ordered. Rail end faces are tapped with four M6 holes in a 63 mm square pattern.
| |
|
|
|
|
Ordering Information | | Quantity | Model | Description | Price | | | X95-0.5 | X95 Structural Rail, 4x M6 holes, 63mm square pattern on ends, 0.5 m | | | | X95-0.64 | X95 Structural Rail, 4x M6 holes, 63mm square pattern on ends, 0.64 m | | | | X95-0.75 | X95 Structural Rail, 4x M6 holes, 63mm square pattern on ends, 0.75 m | | | | X95-1 | X95 Structural Rail, 4x M6 holes, 63mm square pattern on ends, 1 m | | | | X95-1.5 | X95 Structural Rail, 4x M6 holes, 63mm square pattern on ends, 1.5 m | | | | X95-2 | X95 Structural Rail, 4x M6 holes, 63mm square pattern on ends, 2 m | | | | X95-2.5 | X95 Structural Rail, 4x M6 holes, 63mm square pattern on ends, 2.5 m | |
|
Ordering Procedure for Special Lengths | 
| |
X95 Rail Carriers Ordering Information | | Quantity | Model | Description | Price | | | CXL95-50 | X95 Rail Carriage, 1/4-20 & 4-40 Holes, 50 mm | | | | CXL95-80 | X95 Rail Carriage, 1/4-20, 8-32, & 4-40 Holes, 80 mm | | | | CXL95-120 | X95 Rail Carriage, 1/4-20, 10-24, & 8-32 Holes, 120 mm | |
|
X95 Rail Carriers Ordering Information, Metric | | Quantity | Metric Model | Description | Price | | | M-CXL95-50 | X95 Rail Carriage, M6 & M3 Holes. 50 mm, Metric | | | | M-CXL95-80 | X95 Rail Carriage, M6, M4, & M3 Holes. 80 mm, Metric | | | | M-CXL95-120 | X95 Rail Carriage, M6, M5, & M4 Holes. 120 mm, Metric | |
|
Construction Hardware | | Quantity | Model | Description | Price | | | CX95A | X95 Right Angle Joint—thru holes | | | | CX95AS | X95 Right Angle Joint—tapped holes | | | | CX100 | X95 Structural Corner Cube | | | | AX95 | X95 Guy Pivot Support | | | | BEX95S | X95 Single Bench Leg (end); max. load: 240 lb (110 kg) | | | | BEX95D | X95 Double Bench Leg (end); max. load: 240 lb (110 kg) | | | | BCX95S | X95 Single Bench Leg (side); max. load: 240 lb (110 kg) | | | | BCX95D | X95 Double Bench Leg (side); max. load: 240 lb (110 kg) | | | | X95-T | X95 T-stand; max. load: 240 lb (110 kg) | | | | X95-LF | X95 Leveling feet (centered); max. load: 240 lb (110 kg) | | | | VS95 | X95 Leveling foot (side mounted); max. load: 240 lb (110 kg) | | | | CAST95 | X95 Caster; max. load: 275 lb (125 kg) | | | | M-PBN16 | PBN Series Base Plates, Use with UTR120 Series Rotation Stages | | | | X95-AP1 | X95 Mounting plate for SLM-1A and RB135 | | | | X95-AP3 | X95 Mounting plate for SLM-3A and RB335 | | | | X95-EP | Plastic end plate | | | | RB135 | X95 Rubber bumper; max. load: 135 lb (60 kg) | | | | RB335 | X95 Rubber bumper; max. load: 335 lb (150 kg) | | | | SLM-1A | SLM Series Compact Air Mount, 100 lb Max. Load, 60 psi Max. Air Pressure | | | | SLM-3A | SLM Series Compact Air Mount, 300 lb Max. Load, 60 psi Max. Air Pressure | | | | ND40-A | NewDamp Elastomeric Mount, 100-450 lb load, X95 Rail Compatible | | | | ND41-A | NewDamp Elastomeric Mount, 70-225 lb load, X95 Rail Compatible | |
| For more information on the Stabl-Levl Mount, see Compact Air Mount without Self Leveling,
or for the NewDamp Elastomeric Mount, see Constant Natural Frequency Elastomeric Isolators.
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Back To Top
|
|
|
| |
|
|
|
|
|
|
|
|
|
|